| Pure TGIC Type Polyester Resins | |||||||
| Item | Viscosity, mPa.s(200C) | Acid Vale
mgKOH/g |
Softening point | Tg | Applications | ||
| PETG-1000A1 | 1200-3000 | 28-34 | 105-123 | 62 | PE/TGIC=93/7,standard type | ||
| PETG-1000B1 | 9000-12000
(175c,IC) |
32-38 | 100-120 | 64 | 93/7, Standard type | ||
| PETG-1000B2 | 11000-15000
(175c,ICI) |
32-38 | 100-120 | 66 | 93/7, for tribo-gun. | ||
| PETG-1000B3 | 11000-16000
(175c,ICI) |
38-45 | 100-120 | 65 | 92/8 | ||
| PETG-1000C1 | 4-6(ICI) | 33-37 | 110-120 | 67 | 93/7,highTg excellent weatherability | ||
| PETG-1000C2 | 3-5(ICI) | 33-37 | 110-120 | 62 | 93/7,excellent flow, good matting | ||
| PETG-1000C3 | 4-6(ICI) | 33-37 | 115-120 | 63 | 93/7, good overall properties. | ||
| PETG-1000C4 | 2-4.5(ICI) | 30-40 | 110-120 | 63 | 93/7, excellent flow, anti-aging. | ||
| PETG-1000C5 | 3-5(ICI) | 33-37 | 110-120 | 63 | 93/7 high flow, high deposition rate, for tribo-gun,suitable for Al coating | ||
| PETG-1000C6 | 3-5(ICI) | 33-37 | 110-120 | 64 | 93/7, high gloss, better durability. | ||
| Primid Cure Type Polyester Resins | |||||||
| PEPM-2000A1 | 1000~2000 | 28-34 | 105-123 | 58 | Primid, good flow type | ||
| PEPM-2000A2 | 1000~2000 | 28-34 | 105-123 | 58 | Primid, good film property | ||
| PEPM-2000B1 | 12000-16000
(175c,ICI) |
28-34 | 100-120 | 66 | Primid, suitable for tribo-gun. | ||
| PEPM-2000B2 | 12000-16000
(175c,ICI) |
28-34 | 100-120 | 66 | Primid for exterior environments | ||
| PEPM-2000B3 | 12000-18000
(175c,ICI) |
20-25 | 100-120 | 57 | Primid for exterior environments | ||
| PEPM-2000C1 | 3-5(ICI) | 33-37 | 62 | Primid,less mirco-pinholing, good gloss, excellent flow | |||
| PEPM-2000C2 | >7(ICI) | 28-33 | 60 | Exterior Primid type with less mirco-pinholing,yellow resistance, suitable for pipeline coating. | |||
Polyester Resins for Coatings
